ZINCALUME WATTECH WATER TANK
ZINCALUME WATTECH WATER TANK
ZINCALUME® STEEL IS TESTED AND PROVEN TO LAST LONGER
Only the highest quality ZINCALUME® and Colorbond® steel are used in WATTECH Water Tanks, providing unmatched durability that no other tank manufacturer can offer- that’s why WATTECH Tanks last longer than any other brand. Pioneer Water Tanks come standard in ZINCALUME® Steel with your option of upgrading to a wide selection of Colorbond® steel color options.
Next-generation ZINCALUME® steel AM125 introduces magnesium into the aluminum-zinc alloy coating, which improves galvanic protection by activating the aluminum. The result is more effective corrosion resistance. BlueScope Steel research and testing have found that the addition of 2% magnesium is the optimum level of corrosion performance and coating integrity. Along with a capital investment of over $100 million to facilitate the required manufacturing capability, BlueScope Steel can now produce next-generation ZINCALUME® steel AM125 with even greater durability and a more efficient protective coating mass.
To ensure the durability and reputation of next-generation ZINCALUME® steel, BlueScope Steel conducted a comprehensive testing program that included a series of accelerated laboratory corrosion tests as well as a strong emphasis on real-world outdoor exposure tests. A thorough and rigorous testing program ensured that the new product provided optimum performance.
ZINCALUME® steel employs a combination of both barrier and sacrificial protection
ZINCALUME® steel is coated in an alloy of approximately 55% aluminum, 43.5% zinc and 1.5% silicon. Although both Galvanized and Zincaclume Steel are produced as continuously hot-dip coated products, they perform very differently, especially in construction industry applications such as roofing and walling. All coatings protect steel sheets from corrosive attack by acting as a barrier to exclude air, water, and other corrosion caused by contact with the steel substrate.
Galvanized Steel Only Offers Sacrificial Protection
Testing Shows the Comparison
Sacrificial Coatings
Sacrificial coatings are based on the principle that all metals have the potential to corrode, this potential is referred to as “activity”. When steel is coated with a more active metal, the active metal will corrode in preference to the steel and protect from the corrosive influence. In other words, the active material will sacrifice itself. Sacrificial coatings are effective even if the steel substrate is exposed, as it is based on electrical conductivity. Sacrificial coatings physically migrate to a corrosion site to provide protection. Galvanized steel relies mainly on sacrificial protection to resist corrosion. Galvanized steel is coated in almost pure zinc.
ZINCALUMETT® STEEL LASTS LONGER
Zincalume Steel® Duplex Coatings (a combination of Barrier and Sacrificial Coatings)
Alloying of metals with differing corrosion performance allows the coating to be created that offers both barrier protection to protect the underlying steel, as well as sacrificial protection in the event the steel is cut, scratched, drilled or damaged. These coatings are very long-lasting and at the same time protect exposed areas of steel.
Cross Section of ZINCALUME® Steel
OVER 30-YEARS DEVELOPING THE LONGEST-LASTING WATER STORAGE TANK
Next-generation ZINCALUME® steel AM125 introduces magnesium into the aluminum-zinc alloy coating, which improves galvanic protection by activating the aluminum. The result is more effective corrosion resistance. BlueScope Steel research and testing have found that the addition of 2% magnesium is the optimum level of corrosion performance and coating integrity. Along with a capital investment of over $100 million to facilitate the required manufacturing capability, BlueScope Steel can now produce next-generation ZINCALUME® steel AM125 with even greater durability and a more efficient protective coating mass.
Zincalume vs Galvanized Steel Salt Spray Test
To ensure the durability and reputation of next-generation ZINCALUME® steel, BlueScope Steel conducted a comprehensive testing program that included a series of accelerated laboratory corrosion tests as well as a strong emphasis on real-world outdoor exposure tests. A thorough and rigorous testing program ensured that the new product provided optimum performance.
COLORBOND® Color Options for Water Tanks
Only the highest quality Zincalume® and Colorbond® steel are used in Pioneer Water Tanks, providing unmatched durability that no other tank manufacturer can offer- that’s why Pioneer® Tanks last longer than any other brand.
WATTECH Water Tanks come standard in Zincalume® Steel with your option of upgrading to a wide selection of Colorbond® steel color options.
ZINCALUME WATTECH WATER TANK
Pemesanan Langsung
- Telpon
021- 88871689 +62818719119 - Whatsapp
Pesan
Pesan akan dikirimkan sesuai dengan deskripsi anda *